Double Liquid Type High-Pressure Grouting Machine High-Pressure Irrigator for Concrete Cracks Leakage Repair Pump Machine

Usage A and B agents separately pour into the feed cup. Firstly, turn off the switch of the straw and insert the double-liquid needle locked, start the power switch and inject the water-sealing agent into the body for leak stoppage & reinforcement. When spraying the Double-liquid foam agent, the air compressor shall be opened continually, avoiding hardening & jam of the spraying nozzle. Whether the operation surface of spraying is clean or not depends on the thickness of the coating. Spray the spray fabric directly on the construction surface for 2-3 passes. The second pass of spraying is after the completion of the hardening of the first spraying. Power: 1100 W Maximum output pressure: 18000 PSI Restart pressure: 7500 PSI The safe range of high-pressure hose： 10000 PSI Switch valve safety range: 18000 PSI Weight: 13 kg / 29 lb Precautions for use 1. The new injection pump should be lubricated with the lubricant before use. The body and the accessories should be mopped with a lubricant-saturated cloth. 2. Pour the even polyurethane or epoxy into the material cup and cower the lid. Turn the switch to open and the injector to the dust bin. 3. Turn off the power switch, and expel the lubricant from the hose until the medicament come out. Turn off the power and then the switch valve. 4. After construction, clean up the injection pump with a unique cleanser (acetone or xylene). Pour the cleanser into the material cup and expel it from the hose. Put the injector into the material cup, and turn on and off the switch valve several times to create pressure in the hose. It helps clean. After 3 to 5 minutes, expel the cleanser from the pump to the dustbin. 5. After construction, you must immediately use the cleaning agent to clean the machine. 6. The machine will shake during transportation. Please tighten all screws again before using the device. 7. Test the pressure of the machine. It is forbidden to test the working pressure with liquid without viscosity (toluene, acetone, water, etc.), and the machine's force should be tested with lubricating oil such as engine oil. If it is empty, the pressure gauge will not show the pressure. 8. Test Method: Pour the lubricating oil into the material barrel of the machine, close the valve, point the gun out, and turn on the electric drill. When the pressure gauge shows a pressure of 300-400kg, turn off the electric drill, open the valve, and spray the lubricating oil back into the oil barrel. The pressure test is successful. 9. The pressure must be tested with the oil before the new machine is used for the first time. Remember, the above contents must be read carefully. The whole machine has an optimized structure, closed design, beautiful appearance, safe operation, durability, and portability. The good dust structure of the entire device has a longer service life. A unique process design for connecting with the body, which is convenient for maintenance and disassembly. Leakage plugging and sealing of cracks, expansion joints, construction joints, and structural joints of various buildings and underground concrete projects. Leakage stoppage and reinforcement of drilling wall protection in geological drilling engineering. Grouting of reservoir dam body of water conservancy and hydropower project, leakage stoppage and seepage prevention of cracks in water conveyance tunnel, seepage prevention, and reinforcement of concrete cracks in dam body. The subway, tunnels, culverts, sewage treatment ponds, and concrete cracks leak and stop with water. The basement, underground garage, underground passage, and concrete cracks leak water and leak stoppage with water. Roof concrete slab cracks, wall pipes, corners, water leakage, leakage stoppage with water. High-pressure injection of epoxy resin for cracks in concrete structures, beams, columns, and plates. Machine characteristics Rapid construction: It can be raised to 7500 PSI working pressure in a few seconds, and the pouring time is faster than other models。

• Applicable materials: Double liquid-type PU Foam Waterproofing plugging agent, insulation material, Double liquid-type quick-setting PU/EPOXY reinforcing agents
• It is widely used in engineering, including architecture, underground, water conservancy, environment protection, civicism, subway, tunnel, culvert, and crack reinforcement.
• Plugging grouting, Consolidation grouting, Crack reinforcement grouting. The electric high-pressure injection pump is a professional machine used for high-pressure chemical grouting, which works with single chemical grouting material.
• It can produce high pressure when working on leakage-stop constructions and inject chemical grouting materials into concrete cracks when the slurry quickly disperses, emulsify, inflate, and consolidate. Lightweight: Easy to carry and convenient to move. Easy maintenance: Can be maintained without special training, eliminating the possibility of downtime caused by mechanical repair.
• Suitable Material Water-soluble polyurethane plugging agent; Oil-soluble polyurethane plugging agent; Epoxy resin, acrylic resin, and other low viscosity liquid materials.